โ RNS 1.4.2 released https://pypi.org/project/rns/
๐ฌค rns.recipes
top
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ micropython-reticulum on ESP32-S3 feasible performance? โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
Started by Anonymous ยท 4mo ago
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-1
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Anonymous #1 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
https://github.com/varna9000/micropython-reticulum
It says: Announce validation ~6s
Do you think that can make a feasible standalone lora transport node?
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-2
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ LinuxinaBit #2 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 4mo ago
I'd recommend going with [microReticulum](https://github.com/attermann/microReticulum)
instead, specifically https://github.com/attermann/microReticulum_Firmware/releases, as
it's finally reached a state where it should work well as a standalone transport node.
Of course the Raspberry Pi Zero + RNode setup also works well if you really want to run
RNS.
โ 2 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-3
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ circfruit #3 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 1mo ago
I just want to quickly jump in here. I'm the developer of micropython reticulum. Since
the above was posted, I've ported the problematic modules in C with micropython bindings
- the critical parts were crypto modules and bz2 module. I've kept a native micropython
fallback versions just in case. This dramatically increased the performance of the port.
I've been testing it now with sending images, voice etc in small networks and it behaves
good both on LoRa and TCP interfaces.
โ 1 โ 0 โค 4
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-4
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Otto #4 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 1mo ago
circfruit wrote:
> I just want to quickly jump in here. I'm the developer of micropython reticulum.
Since the above was posted, I've ported the problematic modules in C with
micropython bindings - the critical parts were crypto modules and bz2 module. I've
kept a native micropython fallback versions just in case. This dramatically increased the
performance of the port. I've been testing it now with sending images, voice etc in
small networks and it behaves good both on LoRa and TCP interfaces.
Hi!
This is your repository, right? https://github.com/varna9000/microReticulum_Firmware
I'm following the steps for building firmware for the Seeed XIAO nRF52840 + Wio-SX1262.
During the process, I discovered that the files "xiao_rnode_setup.py" and
"provision_xiao.py" are missing in your repository.
I'm afraid that without provisioning EEPROM, nothing will work.
โ 2 โ 1 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-5
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Anonymous #5 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 1mo ago
Pity, that both projects are slopped
โ 3 โ 1 โค 2
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-6
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ circfruit #6 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 1mo ago
Otto wrote:
> circfruit wrote:
> > I just want to quickly jump in here. I'm the developer of micropython
reticulum. Since the above was posted, I've ported the problematic modules in C
with micropython bindings - the critical parts were crypto modules and bz2 module.
I've kept a native micropython fallback versions just in case. This dramatically
increased the performance of the port. I've been testing it now with sending
images, voice etc in small networks and it behaves good both on LoRa and TCP interfaces.
>
> Hi!
>
> This is your repository, right? https://github.com/varna9000/microReticulum_Firmware
>
> I'm following the steps for building firmware for the Seeed XIAO nRF52840 +
Wio-SX1262.
> During the process, I discovered that the files "xiao_rnode_setup.py" and
"provision_xiao.py" are missing in your repository.
>
> I'm afraid that without provisioning EEPROM, nothing will work.
To be fair, I didn't put much effort in tidying up this particular repo. I kind of used
Claude to blindly sort out the pinout and cut off some bits so that microReticulum
doesn't die on the xiao nrf52840.
I give more attention to the Micropython port. I understand that some might not be keen
on the AI tooling, but this allows more people to get engaged in projects like Reticulum
and speed up the adoption. I've been coding with Micropython on microcontrollers before
AI was a thing, so wouldn't call the port a "slop" as Anonymous does above. In any case,
it allows flexibility on adding features (like standalone camera reticulum node), works
for me and hopefully for others too.
โ 1 โ 0 โค 0
โ INFO โ Identify to this node to post. How?
bottom